Vancouver Home Designer
Vancouver Home Designer
December 8, 2020 Architect BlogCoding by Katarina Skipic 1 Comment

Step Code Five: Get Ready to Build Net-Zero Homes

Step code 5 is becoming obligatory in most municipalities in the Lower mainland.

Energy efficiency first became a part of the BC Building Code objective back in 2008. Designers’ options to comply with the requirements comprised “prescriptive” and “performance” approaches, the first being a more common choice. The specific requirements for insulation, windows, heaters, lighting, and other equipment and systems focused on individual elements rather than the whole building as a system. Such an approach led to the performance below the projected possibilities. 

In contrast to that, the “performance” approach starts from a goal. It defines the desired overall outcome and establishes a structure to achieve it. Designers and builders can use software modeling and on-site testing to check the design and demonstrate how the constructed building will meet the requirements. Then they can determine which materials or construction methods will bring optimal results. Many green-building certification programs now take this approach.

The five-step code regulation sets performance targets for new construction, grouping them into steps. The so-called Lower Steps are easy to meet, while the Upper Steps require proper knowledge and efforts. As general guidelines, these will apply across various building types and regions of the province. 

The BC Energy Step Code is meant to ensure that new buildings will perform at their best. Still, it leaves builders and homeowners more flexible options to comply with the legislation. It will support innovative and cost-effective solutions, motivating designers to incorporate cutting-edge technologies, following the progress closely. 

Expectations are that the new five-step Code will keep innovative designs, materials, and high-performance systems getting more affordable and available. The higher steps should turn to a minimum requirement by 2032 in the BC Building Code and 2030 in the National Building Code of Canada.

Vancouver architect five step code
Vancouver architect

Benefits of the Five-Step Code

In Vancouver, for instance, step 3 (lower steps) is already the minimum. But a fully efficient, net-zero level home – step 5 – is an excellent idea for a number of reasons. Besides the obvious, like downsizing bills and doing your part for environment protection, net-zero homes come with increased comfort and resale value, to mention just a few. 

Lower energy consumption reduces overall housekeeping costs and even provides protection from future increases in energy prices, up to a level. Better air quality, achieved by using mechanical ventilation and materials with lower amounts of volatile organic compounds (VOCs), means a healthier indoor environment. 

An energy-efficient building envelope improves overall comfort by maintaining steady indoor temperatures with lower variations. It’s supported by the effective use of daylight, which further reduces your electricity bill.

Moreover, reduced energy use significantly lowers greenhouse gas emissions. Increased insulation levels also reduce sound transmission from outside. Combined with passive solar design, it prevents discomforts during power outages, maintaining stable indoor temperature levels.

Last but not least, net-zero homes feature increased resale value. They are also getting sold more quickly than conventional homes.

The Five Steps

  • STEP 1: EnerGuide Rating System, Built Green Bronze: Code requirements promote a learning process. This step makes the industry more familiar with energy modeling and airtightness testing.
  • STEP 2: Built Green Silver – Making improvements to the building systems based on lessons learned from Step 1
  • STEP 3: ENERGY STAR, Built Green Gold, and Platinum. Further improvements, developing better enclosures and potentially smaller mechanical systems
  • STEP 4: R2000 – Construction of high-performance buildings based on lessons learned from the Lower Steps and facilitated by a mature market.
  • STEP 5: Passive House, Net-Zero Energy Ready

The BC Energy Step Code defines a straightforward path to achieving net-zero energy ready buildings. It starts from the basics, the enclosure-first approach, and guides to progress by helping to minimize energy demand through the use of highly efficient mechanical equipment. 

A continuous air barrier should be considered throughout the design process, to eliminate or severely minimize air leakage. As a result, the heating and cooling demands of the space get significantly lower. Designers and builders learn in the process, including feedback from energy modeling and airtightness testing. Steps 1 -3 (lower Steps) should require little to no market transformation. 

As technology availability develops, together with growing demands for better products and more efficient systems, the capacity to improve will also increase. 

Maple ridge modern home designer
Maple ridge modern home designer

How the Five-Step Code Works

The BC Energy Step Code is a series of measurable requirements. Step 1 requires confirmation that new buildings meet the existing energy-efficiency requirements, while step 5 represents a fully energy-efficient home that is net-zero energy ready. A Step 5 home is the most energy-efficient home level achievable today, and it complies with the Passive House standard.

According to the BC Building Code, all buildings belong to the two basic categories – Part 9 and Part 3. Part 9 buildings are three-story or less with a footprint of no more than 600 square meters. This category includes single-family homes, small apartment buildings, duplexes, offices, and industrial shops. For small buildings, lower steps are achievable using construction techniques and products commonly available in today’s market.

Part 3 buildings are complex, four stories and taller, with a footprint of over 600 square meters. Those are condos, larger apartment buildings, office buildings, shopping malls, hospitals, theatres, restaurants, and more.

The regulation is fully performance-based. Therefore, it doesn’t specify the materials and strategies but rather sets measurable execution targets.

The five-step Code recognizes three categories to meet: airtightness, equipment and systems, and building enclosure. The airtightness and building enclosure metrics take the enclosure-first approach, essential for minimizing heating demand. The equipment and systems metrics then define the total energy consumption of the building to establish optimal performance.

Building Envelope

Adding more insulation to walls is easy to design, build, and maintain. While new technologies might be the first thing to come to mind when looking for an energy-efficient home, it’s a good base that will ensure their performance. 

Without excellent insulation and proper enclosure, complex technology systems will not be able to perform as expected, turning more costly to operate and maintain over time. The building envelope is not only the correct path to high energy savings but also to the improvement of overall comfort and reduced noise levels. However, making major changes to the building envelope during a renovation can be difficult and costly. Hence, it’s better and more cost-effective to insulate and make the home airtight during construction.

The minimum levels of insulation are defined by R-values by Code. The minimum effective insulation levels by the BC Building Code are between R-15.8 and R-21.9. The requirements vary based on climate conditions, region, and some accessories. The Vancouver Building Bylaw, for instance, requires R-22 effective insulation since January 1, 2015.

Determining the right amount of insulation for a high-performance house depends on several factors, including the local climate, budget, and elements specific to your building. Some studies show that the optimal range comprises R-0 to R-10 under the slab, R-24 in basement walls, R-30 to R-40 for main walls, and R-60 to R-80 in the roof. Lower values are suitable for warmer coastal climates, and the higher ones apply to colder interiors and northern regions of the province.

north vancouver architects five steps code
north vancouver architects

Airtightness Testing

Airtightness testing of the building as a whole is an absolute necessity in all steps of the BC Energy Step Code. Whole-building airtightness testing utilizes blower door fans to pressurize/depressurize the building. This includes fan airflow and the pressure difference across the enclosure. The results of testing determine the overall building airtightness characteristics. 

Building airtightness is an energy model input, both at the pre-construction stage and after building completion. The steps for airtightness vary regarding the building type and size, as well as the testing standard used. Airtightness testing should be conducted by an Energy Advisor or other qualified contractor.

Mechanical Equipment and Systems

The mechanical equipment and systems have an enormous impact on the building’s energy efficiency, directly impacting overall energy consumption. The required capacity varies with the performance of the enclosure and vice versa. Heating and cooling, ventilation, water-heating systems are all part of the metrics essential for achieving net-zero levels as Step 5 of the Code. 

Backyard renovation or building a new home, financing your construction project

Five-Step Code Is the Future

The BC Energy Step Code is a result of a desire to manage a consistent set of higher-efficiency standards for the building industry. It offers local governments a simple and effective set of guiding standards to meet energy efficiency and greenhouse gas emissions targets.

Over the coming years, the Province of British Columbia will gradually align the base BC Building Code with the BC Energy Step Code standard, with the goal to make Lower Steps a standard practice for all new construction. 

The Energy Step Code Council encourages local governments by requiring the Upper Steps for any upcoming public-building project. These buildings are meant to serve as high-profile case studies. By referencing one or more steps of the standard, you are doing more for yourself and the community than just accessing co-benefits. It is a contribution to a growing effort to dramatically reduce energy demands across the country. 

By Aryo Falakrou (My Home Designer)

Schedule a call!

Read More
November 30, 2020 Architect BlogLaneway Home by aryo@myhomedesigner.com 0 Comments

Finance Your Construction Project: How to Use Your Resources to Maximize the Outcome

– I dream of renovating but am not sure if I can afford it.

– Yes, I know what you mean; it’s easy for so many people who have unlimited cash or enough savings to run their project in any way they want!

Really? I am a Home Designer, and I don’t know anyone like that!

Most of the people I came across don’t know much about the construction costs, nor haven’t set a budget for their project. Even better, they have no idea where the money would come from!

Before you start any construction project, it’s essential to get a clear perspective of your budget and how much you can pay for your renovation or custom home building. Better said, to finance your construction project, you need to be prepared to stretch and to know precisely how far you’re ready to go.  

I see many of my clients taking their project and asking a builder to provide them with an idea of the cost. Without a plan or drawing in hand, how could anyone expect the contractor to give an even remotely accurate estimation? 

Allow Me to Show You How to Finance Your Construction Project, and Do Things the Right Way, in Your Best Interest

Firstly, try to have an idea about what you want to do, even a basic one. Secondly, make sure to consult an experienced designer who will understand your needs and properly involve. Share your dreams and ideas of the renovation or custom home with a designer who knows their job well. 

An experienced home designer can offer you a reliable plan to develop based not only on your dream but also the approximate cash availability. Only after that you can decide how to finance your construction project. 

These are some options you can look at:

Savings Account

This is the most reliable way to finance your construction project, as long as you have enough money sitting in your account. The best use you can put it in is your overall life improvement.

Borrowing From Friends or Family

Many of my clients, who want to add a secondary suite to their property for the purpose of creating an extra income, rely on this idea. They borrow from their siblings, children, or parents to build a laneway home or an ADU, and pay them back in installments as the investment starts to pay off.

This way they don’t have to go through getting approval from a financial institutions. But what if you don’t have someone to borrow money from? That where you should get creative!

Finance Your Construction Project Through Shared Accommodation 

If all of the above fails, there are still many additional ways to jump over the financial obstacle. Some people dream of building a single-family home, and they don’t want to live in a condo. Usually, they team up with a friend and buy a duplex or a single-family house with ADU. This way, they can share the cost and still get their own paradise, avoiding significant debt along the way. 

Finance your construction project
Finance your construction project

Just the other day, a client called me to discuss the idea of building a duplex in Vancouver. She had it arranged with a friend to purchase a lot, build a passive house duplex, and share the cost so they can own a great affordable home, each on its own side. After calculating their budget, I told them the money wouldn’t be enough to finish the project in the way they want. But the solution was easy—they can apply for a construction loan, which I will explain next. 

Since each unit would have a secondary suite, the money they could collect from the rental could easily pay for that loan. After several years, the loan will be paid off in full, leaving them with an extra source of income.

Now, I am aware that my readers come from different regions, but most places have collected equity over the years. If the property you own doesn’t have any mortgage, there’s a good chance that the bank will grant a loan or refinance the house. The same applies if the mortgage amount is less than 30% of the house market value. Naturally, as long as you meet their other criteria and credit requirements.

Using the Bank’s Money

If you plan to renovate your house, you can ask your designer to draw the plans and have the contractor write an official cost estimate for you. Next, you have to present your project with the estimated cost and timeline to the financial institution’s representative. Banks love to give loans as it allows them to collect interest. However, for the same reason, they have to make sure that their money is safe, granted to a reliable person. 

If you are planning to build a new house, however, the scenario is a bit different. I had a client who bought a lot and paid a 40% down payment. He also had some cash aside, ready for starting the project. He hired me to design the house and help him to manage the builder and all trades for him. While revising, I found out that he didn’t have enough money to finish the project after all. The next step was to help him apply for a construction mortgage.

We finished the house’s framing, installed the windows and exterior doors, and fixed the roof membrane. This stage of the building is called “luck-up.”

This is where I introduced him to a bank rep and presented the bank with the drawings. We went over the total construction cost, the amount that has been spent to that point, and the estimated value of the house after the finish. The bank sent an appraisal, and I had to present the same documentation to him, now for his approval. After the assessment has been done successfully, the bank granted my client the money he needed to finish his project.
If you think you need help with a similar process call me to discuss further at 604-929-6696.

organic architecture
More budget, more features and benefits

Why Is It Good to Use Banks’ Money to Finance Your Construction Project?

Firstly, you can take advantage of the low-interest rate and use it to upgrade your project further. That is particularly convenient if you have the potential of implementing a rental suite within your project. The income you collect from the rental unit will pay for the mortgage.

I understand some people are afraid of going under any dept. Like another client of mine, who could have been easily approved by the bank for the entire renovation of his house. The only problem? His wife was against any loan or mortgage. So they ended up living in their run-down house for the rest of their lives.

What Exactly Is a Construction Loan

A construction loan is a segment of short-term loans, tailored specifically for use by an individual home builder. Construction loans serve to finance your construction project of either building a new home or renovating the existing one.

Construction loans are not supposed to cover the entire cost of the project. Instead, those are used as a temporary financing bridge that can cover the missing part of the budget during the build time. Typically, after the construction is complete, the homeowner will obtain a longer-term solution. The options include refinancing the existing construction loan and transition to a conventional mortgage.

It may happen, though, that a bank considers your construction project as a risky investment. In that case, you may still get the money, but the interest rate will likely be somewhat higher. Also, such a loan will feature strict terms that you must adhere to, like paying off in entirety by the time the construction is complete.

What A Construction Loan May Include

A construction loan comprises one application and one closing. Those cover the construction phase and the permanent financing.

It can start with the initial loan payment you need to purchase a lot. If you already hold a loan on that property, the first disbursement of the loan will pay off that specific loan before the construction starts.

The bank may make scheduled payments to your builder during the 12-month construction phase. Subsequently, they will offer a transition to a fixed-rate mortgage after that period.

Finance your construction project and build a laneway house
Finance your construction project and build a laneway house

How Can You Use Construction Loans to Finance Your Construction Project

Construction loans provide more flexibility in utilizing your budget to get the most out of it. That may include expansions, hiring better designers, making payments to contractors, or even getting more luxury materials. Even when the initial budget seems sufficient, by upgrading it with a loan, you can get more quality in each segment and get more creative with design solutions.

The Bottom Line

As Robert Kiyosaki says, there is good debt, and there is bad debt. To apply for a loan and mortgage to upgrade your living standard, which gives you better mental and physical health, especially if you can collect rental income, is good debt.
So, do not be afraid to get into a good debt if the end result will give
you a better financial outcome as well as more comfort and mental health.

After all, life is too short and we should live it to the fullest!

By Aryo Falakrou (My Home Designer)

Schedule a call!

Read More
November 19, 2020 Architect BlogCodingLaneway HomeSenior life by Katarina Skipic 0 Comments

Renovation or Building a New House: Ernest Story

Ernest is a 61 year young who lives with his wife in a spacious house which, at the moment they come to our story, has long begun to show signs of ageing. Little by little, problems kept getting bigger, and the house needed a major repair. The question was, how to decide between renovation and building a new house.

One day, Ernest had decided to finally do something about it. He asked himself: Is it a good idea to repair the old house? How much a full renovation would cost? Is there a better solution? What would be more beneficial – renovation, or building something new?

Ernest realized that it would be best to investigate all options first. He started by asking neighbours and friends for opinions. Naturally, everyone had their own idea about what should be done.

The problem here is an utterly personal perspective. People have good intentions, but they can’t know what’s best for you, especially when it comes to your home. It’s all about different lifestyles, different habits, different needs. And when it comes to the matter of aging in place—different health. 

One idea started to make sense, though. Why spending a significant budget on a renovation if it’s possible to build a new house instead? But then again, could such an investment really pay off? 

What Ernest didn’t think of, at first, was consulting a design professional. He did make a call to the municipal hall in order to find out regulations that would help him decide. Mostly he was interested in how many square feet of a new house he could build.

New-Westminster-Renovation
New-Westminster-Renovation

Renovation or Building New, Ernest Couldn’t Decide

He discovered that it was possible to build a duplex house with two laneway houses, and two secondary suites on each side (ADU). This way, he could live on one side of the duplex and have a laneway house and the suites for renting. Naturally, a secondary suite sounded like a great way to secure some passive income for his retirement. Ernest realized that if he could also manage to sell the other side of the duplex, it would pay off the construction cost.

But as we are getting older, we start craving more quietness, peace, and privacy. Ernest understood that, very soon, he might come into a situation to regret the original idea. Having too many people roaming around his property sounded tiring by itself. Having the same but with a bunch of strangers on top…well, let’s say he cooled off the idea pretty fast. 

Yes, it would be great to have a new house, and even better if the project could pay itself off—but not at the cost of his privacy. After reviewing all options once more, it was clear that he and his family would do better if they build a duplex without any ADU’s.

Once again, Ernest picked up his phone and called several local builders for an interview. He thought it would help him choose which one to hire. Then was the moment to meet Aryo, whom he found by filling an online form.

The first question he asked Aryo was if he had any experience building duplexes in the area. Of course, the answer was positive.

“But, before we go further about my experience, let’s talk about your project and your goals.”

Master Bedroom
North Vancouver home design

Aryo Knew Better

After a long conversation, Aryo found out a lot of interesting facts. First of all, it turned out that Ernest did not really think his project through, not nearly enough. He failed to consider the age he was approaching and too many difficulties it will gradually bring. Moreover, he planned to build a tri-story duplex on each side, featuring less than 600 square feet on each floor.

Like many others, Ernest believed that living in a brand new, beautiful, and shiny house would be enough. The truth beyond, however, was different. Just any kind of new, shiny house wouldn’t bring the kind of happiness he imagined.

Aryo explained to Ernest why it’s good to have a proper, thoughtful plan. He elaborated on the significance of hiring a professional designer – and not just any. What he needed was a designer who takes into consideration the occupant’s lifestyle so that the final project would maximize personalized functionality. That way, the outcome would be much more beneficial for Ernest and his wife in the long-term. 

Such kind of consultation is rarely, if ever, offered by a builder. Not that the builders don’t care—on the contrary. But there’s a difference in knowledge and approach. A good builder knows how to build a sturdy, reliable, good quality house that the homeowner has ordered. But what if the homeowner doesn’t know what he wants, or what is good for him/her in the first place? Then a proper consultation can make all the difference between a disaster and a happy ending.

Maple ridge modern architect renovating or building a new home
Maple ridge modern architect

Renovation or Building New: Deciding Together

Aryo and Ernest talked for many hours. Their brainstorming paid off, and the plan slowly started to come up. Ernest was surprised to find out just how many small but significant details he was missing to consider. 

The idea of having to climb endless stairs, many times a day, suddenly exploded in all colors. Indeed, his original ideas were very fashionable, and those floating staircases could have been gorgeous. But now Ernest also realized that he would probably end up establishing a mini studio on the ground level in just a couple of years, merely to eliminate the need for endless climbing. 

Aryo knew that sooner than later, the couple would probably regret the decision. When your knees are hurting, and your muscles are weak, the last thing you want is a challenge in maintaining personal hygiene. There was no reason why Ernest’s wife should give up her dream of a fancy new tub. The thing was to have a proper one, as functional and approachable as striking in design. 

In the end, Ernest decided to build a house quite different from what he originally intended. But he was delighted to do so. The new project was smart, thoughtfully designed, and full of handy amenities that would add to the quality of their lives in fifteen years just as much as they do now. 

senior living
senior living

What Can a Professional Designer Do, That I Can Not?!

An outstanding design professional will compose the house that fits the homeowner’s lifestyle of today, as well as ten years or more in the future.

A designer who thinks outside the box doesn’t focus solely on what a client desires today. Many times, the homeowner is simply not aware of what lies ahead or even what would be best for him/her. Both renovation or building a new home can bring significant overall improvements if done correctly.

A good designer should really get to know his client. He will think about the homeowners’ present lifestyle as much as about all changes that will come to their life. Often, these changes involve newcomers (babies, in-laws) or a need for rental income, lifestyle improvement, even upgrading to catch up with new trends.

As homeowners, we often think that we are the only ones who know what is best for us and our houses. Some even believe that a professional designer is a redundant category, who will do the same as we would, but also charge for it. The truth, though, is somewhat different. 

You certainly know what your needs are….right now. Aging brings challenges that we might not be aware of until we face them, and that moment might not be the best time to do something about it. Thinking ahead is the key, but how to think ahead if we don’t know what will come? And if we don’t know what is ahead of us, then how could we even think of preventing the issues?

modern-architecture-home1

Don’t Wait, Prevent!

That’s where a good designer comes to the scene in full glory. A good designer has abundant experience in preventing issues. Not because he faced all of them, but because his clients did. One by one, they kept facing and solving different problems, learning a lot in the process. That is why a designer might know some things better than you. In a certain way, he was already there.

Before you start a major renovation, building a new house, making a considerable investment, dig deep down all the challenges that might come to your life. Pinpoint them and design your house with the future in mind. And the moment you find an obstacle, ask for professional assistance that will help you determine all necessities and come up with the appropriate solution that matches not only your lifestyle but your personality as well. 

By Aryo Falakrou (My Home Designer)

Schedule a call!

Read More
November 14, 2020 Architect Blog by Katarina Skipic 0 Comments

Wallpapers are Back in a Big Wave

Wallpapers are back, can you believe it? 

Do you remember houses in the ’60s and ’70s with patterned wallpaper that could make you feel dizzy at a glance? Some were flashy and colorful, and some were discreet. And then they went to history. Who would have thought that only half a century later, they would return? 

What you perceive as wallcovering now entirely differs from the era when virtually every vertical surface featured visually striking layers of paper. Sometimes the rule of thumb was一the more bizarre, the better. Wallpaper was everywhere, and, at some point during the eighties, the world eventually got tired.

There are many other logical reasons as to why it happened. Lifestyle was changing, and so were the trends. The need for simple, minimalist interior designs was on the rise, and flashy wallcoverings didn’t quite fit anymore. Predictions were not optimistic, and it truly seemed that this kind of deco had finally bottomed out so much that it’s unlikely ever to see it return.

And yet, wallpapers are back in full glory, much more modern, in new designs and textures, in 3D version, or in a combination of patterns and exposure from the wall. I see new decals combined with fabric and vinyl or thin metal, and I love them because they give a different dimension to the room. Wallpapers are inspirational; they give you the feeling of who you are and can even help your mood and daily activity. 

Stay with me to get a little insider knowledge and truly take the best out of wallpaper trends for 2020.

Contemporary-House-design
Contemporary-House-design

Wallpapers are Back in Style

Wallpapers feature a rollercoaster of a reputation. Not as far as ten years ago, if you heard someone mentioning how they were thinking of putting up wallpaper, you would probably stare in disbelief. It’s not so weird, as some of us still remember spending endless hours tediously removing old wallpaper from every surface of the house, in order to coat the walls with refreshingly simple layers of paint. 

But this is 2020, and that means improvement: no thick paste anymore, no hard labor, and no messy, exhausting removal. Wallpapers are back pre-glued and ready to be applied directly to the wall. Many of them come in specific designs, such as giant stickers, for effortless removal without damaging the surface under. Very convenient, as it allows for experimenting and refreshing without a permanent commitment.

In contrast to the cool and neutrals tones that dominate as choices, wallpapers feature bold colors, statement patterns, and nature-inspired prints. In difference of wallpapers from the 20th century, you should not cover your entire home in landscapes or florals. Quite the contrary, the trend focuses on visual accents and a chance to make a significant impact on a smaller scale.

Also, wallpapers are back in unusual spaces. Toilets, bathrooms, kitchens, foyers, and closets are all excellent places to experiment with a bold print. If you want, you may even try covering the entire small room for a unified, statement look. In a living room, dining room, or bedroom, though, it’s better to stick to accent zones. 

New Statement Wallpapers are Back

Feel free to experiment. The best part of new wallpapers is: if you don’t like it, just take it down and start again. Whatever might be in your taste, there is something to fit with it. Everything goes, from traditional florals and tropicals to modern geometric and architectural designs. New printing techniques made possible a large variety of finishes, and the availability of new technologies makes it even more exciting. Leather, silk, 3d, you name it, and someone will have it already made. 

Wallpapers are back
credit to: https://www.flickr.com/photos/studio_zlamal/7073350935/

Bold Patterns and Palettes

Pops of colors add dynamics in contrast with neutrals, offering some edge in interior design and moving the overall palette towards the warmer side. Combinations of different patterns are encouraged by designers, and an eclectic mix of classic stripes can work great with exotic styles. Still, it’s not a good idea to make the whole space look too busy, so go with colors that complement each other. 

Naturals

Sustainability is expected to hit its highest in interior design trends for 2021. Increased awareness of our planet and the expendability of its natural resources is finally supported by the elevated desire to repair, repurpose, and recycle, on a global level. Durable, raw materials and designs take over the scene. Simultaneously, green hues follow with the biophilic trend of wellness, together with real plants and foliage. Bringing the outside in is the new black.

Graphic Patterns

A rise in popularity of ordered, structured design brought interiors embossed in elemental geometric arrangements and monochrome palettes. Considering the challenging times we live in, it’s not surprising at all. Geometry in the interior offers some psychological relief through comfort found in routines and stable, defined patterns.

Wallpapers are back
credit to: https://www.flickr.com/photos/127980981@N03/15233317154/

Monochrome Graphics and Patterns

Black and white combinations are an eternal synonym for style, that gets another dimension in monochrome wallpaper solutions. From eclectic to high-tech design, it features pictures that can trick the eye, ranging from endless spirals to “moving” images. These wallpapers can be indicators of your condition. According to some studies, the faster the picture “moves,” the more tired the person is.

Murals and Decals

Murals and scenic wallpapers are a huge trend this year. They present an extraordinary statement for your walls as well as a road to some much-needed escapism. Wall murals have been rising in popularity for some time, as a convenient choice of a statement feature wall for designed homes. Popular categories include forests, world maps, or striking floral arrangements.

Peel and stick materials offer the most effortless way to refresh the room, and a lot of extra flexibility in decorating. It’s broadly used in rental properties as a temporary solution, but also by homeowners who are not ready for a more permanent change.

Chintz

Traditional schemes, in eclectic tones and quirky motifs, are both whimsical and sophisticated. Chintz is probably the closest reminiscent of the old centuries wallpapers. It’s a transitional treasure, as they can look simply amazing when paired with modern furniture and decor pieces. That juxtaposition provides a new sort of dynamics that is edgy, fresh, and interesting at the same time.

Old Glamour

Old Hollywood, art deco, decadence, and romantic vibes of the Golden Era with a modern twist are more desirable than ever. Botanicals, golden-lined geometrics, rich reds, and deep hues offer a dramatic, opulent finish. It bears a sense of careless luxury, quite welcome as a way to shelter from the harsh reality in 2020.

Luxury home builder wallpapers are back
Luxury home builder

Metallics

The original novelty in wallpapers is a metallic effect, an ideal companion of modern minimalist design for a living room or bedroom. It comes in a variety of stylish options, with black or graphite being the most popular. The combination of matte and glossy coatings of the same color is recommendable as a way to add some energy between the walls. Relief metallic wallpapers and rougher textures present a welcome refreshment from a standard flat look.

Waves

Very fashionable wallpaper in 2020 offers an incredible variety of options, from wide stripes with a gradient color transition to calming, zen-style aquarelles. Novelties feature wave patterns with a 3d wavy surface, attractive in appeal, and perfect as a focal point for the interior of the living room or bedroom.

Alternatively, you can go for a middle solution and choose a mix of embossed wallpaper with a wave pattern and a metallic effect. Use it only to finish one of the walls, though; otherwise, the result will be beyond overwhelming and unpleasant to spend a lot of time around.

Wallpapers are back in Various Materials

Paper-backed or solid sheet vinyl is typically a base for patterned wallpaper designed for residential use. It’s resistant to stains and grease and effortless to maintain. Still, it’s good to avoid paper-backed wallpaper as a covering of a wall in a bathroom or any other room that generates a lot of steam. Moisture affects the paper and causes the vinyl to separate, also decreasing the longevity. 

Wallpapers are back
Credit to: https://www.flickr.com/photos/decorology/3008718272/

Vinyl-coated paper is a wallpaper with a layer of liquid vinyl sprayed on the surface. It provides a good base for printing details and patterns. Also, it is durable and easy to maintain.

Fabric-backed vinyl is considered to be the most durable base for a wallpaper since it’s made of notably dense fabric. It is not very suitable for pattern printing, so you’ll likely find it in different monochrome palettes and specific finishes. This material is heavy and sometimes challenging to install, especially for DIY. On the other hand, it’s a suitable solution for kitchens and bathrooms, as more moisture-resistant than standard paper-backs. 

Digitally printed vinyl is, commonly, custom-designed for printing realistic photo images according to the customer’s choice. It comprises a very thin layer of paper and a paper liner to be placed underneath to keep the placement as smooth as possible. Printed vinyl works excellent as a mural, suitable for any room or area. 

Wallpapers are back
Credit to: https://www.flickr.com/photos/127739434@N08/15338122089/

Wallpapers are Back, Period.

All trends in 2020 fluctuate between maximalism in design and warmth in colors. Geometric designs seem to grow bigger, and whimsical vibes follow closely. It’s exciting to wait and see what will come next, as 2021 is promising to be a bold and colorful year, at least in terms of wallpaper design. 

By Aryo Falakrou (My Home Designer)

Read More